UC100 - Low speed

Technical Specification

 
Specification Description
Indicator Power
Power Supply Voltage 90V to 245V AC, max 30W
Controller RTC Built, 32-bit high speed ARM7
A/D Converter
Type 24-bit Delta Sigma
Analogue Input Range 0 mV to 25 mV
Linearity <0.03% FS
Gain Drifting 2PPM/◦C
Conversion Rate 10 SPS or 600 Samples/Sec
Internal Resolution 1 in 30,000
Display & Keypads
LCD Display 4 lines 20 character
LED Display 6 digits 7 Segment LED Display (size : 0.56")
Keypads Capacitive Sense 17 alphanumeric keys
Calibration & Weighing
Calibration Digital calibration by using standard weights
Weighing Functions Auto Zero, Power On Tare
Inputs& Outputs
Input Load cell
Serial Ports

Single RS485 Half Duplex Port and Two RS232 ports.

Connectors R/A pluggable terminal connectors
Collector Output 8 isolated open collector outputs for 500mA load current max
Isolated Inputs 8 isolated inputs for 24 VDC max
Load cells
Excitation 5 VDC
Load cells Drives 4 Load cells of 350 Ω
Mechanical Dimension
Cabinet Size 200mm (L)*125mm (H)*207mm (W)
Cutout Details 122mm (H)*206mm (W) with mounting hole 240mm (L) *60mm (H) at 4 holes 5mm diameter
Gross Weight 3.10 Kg
Environmental
Operating Temperature -10◦C to 40◦C
Storage Temperature -25◦C to 70◦C
Relative Humidity 90% R.H without dew
IP Level Front panel IP 55

Shipper Weighing system  I / O Details

 
S. No. Input parameter Description Output parameter Description 
1. START To start the weighing  ACCEPT Feed hopper Operation 
2. STOP To STOP the weighing  LOW REJECT Medium Gate operation 
3. SENSOR  Product Detection  HIGH REJECT Fine Gate operation 
4. TARE To TARE the platform  REJECT Reject for  Gate / Tilting  
5. PRINT To Print the report